Plastic Glow in the Dark 12 Inch Unicorn Horn

SOLD PER HORN

Size: 12" long, 3.75" diameter base, 1" across widest part of the base with realistic texture

These come ready to be mounted on a head by either drilling holes in the bottom and sewing, or gluing them down directly, or any of the other commonly used methods of horn attachment. (Strong magnets, screws/bolts/etc)

Each horn can very on weight since they are hand slushed, but most will be about the same. While these are very durable, if enough pressure is applied they can break. Heat can also cause warping.

Glow in the dark horns will glow in the dark once properly charged under a bright light. By "charged" we mean you let them sit under the bright light for an extended period of time. The best light is either direct sunlight, or a UV light.

The advertised glow times may be reduced due to the opaque resin.

Glow times:
Green: 12+ hours
Blue: 6 Hours
Aqua: 10 Hours
White: 6 Hours
Dark Blue: 3 hours
Orange: 1 Hour
Red: 1 Hour 

SOLID: These are opaque horns filled with a rigid expanding foam for extra durability.

Stained horns will come with a brown paint wash on them, sealed with clear spray.

In order to purchase the 'installed' options you must also purchase a resin blank at the time of buying. These horns will come with installed wood nuts in the base of the horn, and the hardware required (Bolts/washers) to attach them to a resin blank. The blank will come with holes drilled where the horns are to be installed. These will make the antlers removeable for storage and travel.

HOLLOW: Are still opaque, just do not come with the rigid foam in the center. These horns are more liable to break around the edges during transport; please keep this in mind! (Keeping them hollow does not make them lighter, since we have to make them thicker to resist breakage.)

SEMI-TRANSPARENT: These are hollow horns that are made out of a semi-clear resin, so you can still use LEDs with them, however they aren't see-through.